What Are the Rca Universal Remote Codes for Toshiba TV & Guide

Toshiba is a well-known television manufacturer in the market. Toshiba televisions are typically fitted with a remote control.

However, if you’ve misplaced or broken your Toshiba television remote control, you can programme the television using a universal remote control.

You must first learn how to get Rca Universal Remote Codes for Toshiba TV before you can use the Toshiba TV universal remote .

Toshiba televisions, video players, and DVD players are all covered by the RCA Universal Remote Code Book. RCA is a market leader in electrical components.

This remote control comes pre-programmed, but it can also be used if you’ve misplaced or lost your original remote control. Toshiba’s universal remote is intended to replace all existing remote controls with a device-based alternative.

With clearly marked and easily identifiable components, you may effortlessly operate numerous components with the push of a button.

Rca Universal Remote Codes List 5 Digit

Rca Universal Remote Codes for Toshiba TV

The following is a complete list of RCA Universal remote control codes compatible with Toshiba television models:

Five digits Codes for Toshiba’s universal remote control-

11524 11704
11369 12006

Toshiba universal remote control codes – 4 digits

1290 1190
1000 1049
1207 1453
1356 1358

Toshiba universal remote control – 3 digits

000 072
201 018

TRca Universal Remote Codes for Toshiba TV – 2 digits

You should be aware that Toshiba America’s electronic components contain universal remote controls that work with any Toshiba television, VCR, or DVD player. These remotes come with a programme code, but you can use them even if you lose or misplace that code. Furthermore, you can effortlessly programme your gadgets using the Toshiba TV remote codes.

Programming Instructions for the RCA Universal Remote Code Book for the Toshiba Television:

After supplying the “Toshiba TV remote control” code list, power on the television, DVD player, or other device you wish to connect to the “Toshiba remote control.”

Additionally, Sceptre TV Codes for the GE Universal Remote can be found here.

Step 2: Locate the “Device Code Table” in the “Toshiba tv remote handbook.” Locate the area that corresponds to the type of device you wish to programme.

Step 3: Locate the manufacturer’s name for the device you’re programming. Keep track of the code number with the manufacturer’s name. The first code is the most often used and is normally valid for this manufacturer.

Step 4: Hold down the Mode button on the “Toshiba remote control” until a screen displaying the type of device you wish to configure appears.

Step 5: On the After Toshiba universal remotes, press and hold the callback button. Enter the first four numeric codes that appear in the device code table while holding down the callback key.

Step 6: The mode indicator lights twice after you enter the code.

If the indicator blinks only once, verify and re-enter the code. If this code is valid, the “Toshiba tv remote control” will immediately begin working. If the remote does not function, access the following code in the device code table and repeat the previous procedures until the remote functions properly.

How one can connect Toshiba remote control to RCA TV?

If your TV has a Setup button, press it to begin.

  • Press and hold the Setup button until the red light at the top of the remote changes to green, then release the button.
  • Enter the number 9-9-1. The light should flash twice in the green direction.
  • Continue to push the CH button until the television shuts off.
  • Once the TV has been turned off, hit the Setup button to secure the code.
  • To turn on the television, press the power button on the remote.

How can I set my remote to my cable box ?

Check to see that the remote batteries are properly placed and that your TV and TV Box are both operational. Set the television’s input to the input that is linked to the Xfinity X1 TV Box (optional). To use your remote, press and hold the Setup button until the LED at the top turns from red to green. Activate the xfinity button on your remote control.

Back to top button