Sceptre TV Codes for GE Universal Remote | Sceptre Remote

Sceptre tv remote control can be controlled by a universal remote control, and all 5-digit universal remote control codes and 4-digit codes are programmed in the remote control. If you bought a universal remote control and you need a remote control code to control your TV flash drive, here is the TV code that should work. This code works with all universal remotes. If the first does not work, continue to try the numbers on the list.

5 Digit Sceptre TV Remote Code

Sceptre TV Remote Code
11217
10000
11360
11599
10878

4 Digit Remote Code for Sceptre TV

Sceptre TV Codes
0000
0080
0991

Sceptre Universal Remote Codes – 3 Digits

Sceptre TV Remote Code
500
086
654
279
064
640
552
781
837
677
641
159
246
908
674
207

Sceptre TV Codes for GE Universal Remote

Sceptre TV Remote
3521
4071
5111
4071
3521
5111
4071
5111
5367
5260
3521
0149
1132
1167

5 Digit Sceptre Remote Codes – RC64

11599
10878
10000
11360
11217

Use the universal joystick code to make sure that the TV or other device you want to configure is connected and turned on. Next, make sure that the battle works remotely. Pay attention to the scepter remote control code from the list. After spending the night programming the scepter universal remote control, it no longer disappoints when you learn that you are not connected or that the struggle with the universal remote control is bad.

 How to Program a Universal Remote for Sceptre TV

Here are the steps to program a television stick with a universal remote control code. Follow the steps below to program the remote control.

 Step 1: Set “Switch Mode” to TV.

Step2: Select the button while the visible LED flashes twice.

Step 3: enter the 5-digit code.

 Step 4: The codes below are the most popular ones Scepter TV for your brand = 11360 11217 10878 11599 10000.

 Direct Code Entry Method

If you are looking for steps to easily enter the code on your device, there are steps that you need to take to enter the code yourself so that you get the best post. Let’s see

1). First, find code on the list.

2). Then you need to turn on the device you want to control as you like.

3). Now, if you do not see the indicator, you need to hold the “SETUP” button.

 4). Press and hold the remote control button. You can see that the “red light” blinks and remains on.

5). Enter the code you received in the list. You need to enter the correct code using the button on the remote control.

6). Then press the on / off button. If the code is correct, the device is turned off, so I successfully programmed the device remotely.

Note. If you enter the wrong code, the device will not turn off. This means that you will have to try another code again in the same step. If no buttons are pressed after 10 seconds, check if the remote control supports all adjustable functions.

You need to restart the process. In the latter case, you need to point the remote at the device. You need to press the POWER button when the device is turned off. If the device does not turn off, return to step 3 and enter the following code in the list. You must complete this process until you find the device code.

Auto Code Search Method

To find the automatic code, you need to read the following steps. As with automatic search, all codes are stored on the remote control, which facilitates the search for codes. So follow the instructions below.

 1). You need to turn on the device you want to control.

2). Now press the “Settings” button for few seconds. Then press the appropriate button on your device

3). Now press the POWER button and wait for the device to turn off.

4). Then press the POWER button to start the search. When searching for a code, the red indicator flashes for exactly 2 seconds.

5). Make sure your finger is active.

The remote control should now point to the device. You must make sure your device is working properly. If this works, programming is not required. If an error is displayed, go to step 2 to restart Autodiscover. For each device (TV, DVD, SAT, AUX) in the entertainment system there is an iterative process. Eight devices can be programmed simultaneously.