Connect with us


RCA Universal Remote Control Programming without Codes: Easy Step-by-Step Guide



RCA universal remote controls are a great way to control all of your devices with one remote. However, programming them can be a bit tricky, especially if you don’t have the code manual. In this guide, we’ll show you how to program your RCA universal remote control without codes, using simple and easy-to-follow steps.

This guide includes instructions for all RCA universal remote models, so you can get your remote working with your devices in no time. We’ll also cover some troubleshooting tips in case you have any problems along the way.

In this post, you will learn about RCA universal remote programming without codes and other methods also. There are three types of RCA universal remotes like 4-device, 6-device and 8-device.


Program RCA Universal Remote Codes For Sony TV

How to Program Your RCA Universal Remote Without Codes

Programming your RCA Universal Remote without using codes is a convenient way to control your devices. Follow these steps to get started:

Step 1: Prepare Your RCA Universal Remote Control

  • Ensure your RCA Universal Remote has two AA alkaline batteries installed. (Note: Batteries may or may not be included, depending on the model.)

Step 2: Turn On the Device You Want to Control

  • Manually turn on the electronic device you want to program the remote for (e.g., your TV).

Step 3: Start the Auto Programming Process

  • Point the RCA Universal Remote Control at the device with its IR sensor.

Step 4: Press and Hold the Relevant Device Key

  • If you’re programming a TV, press and hold the “TV” key on the remote.
  • For other devices like VCRs or DVD players, press and hold the corresponding device key.

Step 5: Press the Number Key

  • While holding down the device key, use your other hand to press the number key corresponding to your device type:
    • Press “2” for VCR.
    • Press “3” for DVD.

Step 6: Activate the ON/OFF Function

  • Press and hold the device key you want to program while simultaneously pressing and holding the remote’s “ON/OFF” key.

Step 7: Wait for the ON/OFF Key to Activate

  • Keep holding both keys until the “ON/OFF” key on the remote lights up and stays on.

Step 8: Point the Remote at the Device

  • Direct the remote towards the front panel of the device you want to control.

Step 9: Initiate the Testing Process

  • Press the “PLAY” button on the remote and wait for 5 seconds. During this time, the remote will test a batch of 10 codes on your device.

Step 10: Did Your Device Turn Off?

  • If your device turns off, proceed to the next step.

Step 11: Use the REVERSE Key

  • Press the “REVERSE” key on the remote and wait for at least 2 seconds. The remote will try the last of the previous ten codes.

Step 12: If Your Device Turns On

  • If your device turns on, press the “STOP” key. Congratulations, you’ve successfully programmed your device!

Step 13: If Your Device Doesn’t Turn On

  • Press “REVERSE” again. The remote will test the next code in the batch. Keep pressing “REVERSE” every 2 seconds until your device turns back on. Once it does, press the “STOP” key.

Step 14: Additional Tips

  • If you accidentally press the “REVERSE” key after your device turns on, press the “FORWARD” key, then wait two seconds to see if your device turns off again.

By following these steps, you can program your RCA Universal Remote without the need for codes, making it easier to control your devices hassle-free.

FAQs (Frequently Asked Questions)

How will you know about 4 or 5-digit RCA remote codes when programming the universal remote?

You will get the 4 or 5-digit remote code from the remote user guide for programming the RCA remote.


In the user guide, it is clearly mentioned which codes you should use while programming the RCA universal remote.

In some RCA remotes, this information is given on the back of the remote below the battery location.

What to do when I don’t see the specific code for my device from the code booklet?


Visit the official website of RCA where you can get the code finder page. Choose the device model name from the drop-down and also the device category.

When you select both the drop-downs, there will be a list of all RCA remote codes for your brand device. Take the code and begin the programming procedure.

What can I do when all the function keys do not work after successful RCA remote pairing?


After the successful pairing, if you find the function keys not working on your RCA universal remote, try out other codes from the code table. There are multiple remote codes for every brand, so use another code and check.

Before re-pairing another RCA universal remote code, remove the battery from the remote’s battery compartment. Re-insert again and start the programming by using another RCA code.

What will be the problem if my RCA remote stopped working with my favorite device?


The RCA remote programming may be gone by getting the batteries removed from the remote. Re-program the RCA remote with your brand device.

Question – Is this programming method for the RCA Universal Remote suitable for all devices and brands?

Ans . While this programming method is compatible with many devices and brands, it may not work with every single device or brand. Compatibility can vary, so it’s important to follow the steps and test the functionality after programming.


Question – What types of devices can I control with an RCA Universal Remote using this method?

Ans . You can use this method to control a variety of electronic devices, including TVs, VCRs, DVD players, and other compatible devices. The specific device type is determined by the number key you press during programming.

Question –Can I reprogram my RCA Universal Remote if I accidentally press the wrong button?


Ans . Yes, you can reprogram your RCA Universal Remote if you accidentally press the wrong button. Simply start the programming process again from the beginning.

Question – What should I do if my device doesn’t turn off during the programming process?

Ans . If your device doesn’t turn off during the programming process, follow these additional steps:


Step-1 After pressing the “PLAY” button and waiting for 5 seconds, press the “REVERSE” key on the remote.

Step-2 Wait for at least 2 seconds while the remote tries the last of the previous ten codes.

Step-3 If your device turns on, press the “STOP” key to finish programming.


Alena is a tech blogger with a passion for helping people get the most out of their electronic devices. she has extensive experience with universal remote control programs, TV repair, and device repair. she is always up-to-date on the latest trends and technologies, and she shares his knowledge with his readers in a clear and concise way.