Do you know the device code of RCA universal remote? If your answer is no then don’t worry. Here you get RCA Universal Remote Codes Book as well as RCA universal remote programming instructions that help you out. You can find the code for your remote control through the “Code Search Method” by this method you get the suitable code for your remote. Here you get 3ways to solve your problem by these might be your problem can solve.
Program RCA Universal Remote Manual:
Step 1: Keep your remote in front of RCA remote codes finder. Enter the device code, if you are unable to find the code automatically through this method you can easily find the code for your remote.
- In the remote code finder, you have to enter the “Model Number”, which is printed on the middle of your remote.
- After that, you have to enter the “Product type” such as(tv/DVD/VCR or cable box).
- As well as you also enter the “Brand Name” of your device(e.g., TCL, Samsung, and many more).
Step2: Press the “POWER” button on your remote. Turn “On” the device you want to control.
Step3: Keep the remote in front of your device for which you want to program. Until the entire process of programming cannot complete.
Step4: There are various types of device buttons highlighted in your remote control. Press the button on the appropriate device. Which one do you want to program?
Read Also: New RCA Universal Remote Codes List 4 Digit
Step5: Press and hold the device button which matches your device. As well as also press the “code” of your device. This code you will get it from the remote code finder, keep pressing the button even the indicator light turn “Off”.
Step6: See the “POWER” button, if the indicator light is on then your programming process is complete and successfully saved.
Note: If the indicator light flashes four times and turns “off”, then the input code is incorrect. You have to press the device button as well as re-enter the code.
Step7: Check whether the remote control works well or not. By pressing the “POWER” button, if your device turns “ON” or “OFF”. Then your remote work well.
If your remote control does not works well then check the information you entered is correct or not. If the giving information is correct and then also your remote not work well then you may have to go for our other methods which are described below.
RCA Universal Remote Programming Through “Without Code Search Button”:
Step1: Switch “ON” your appropriate device which you want to program. If you are not able to do an automatic code search then you go for “manual code search”.
Step2: Keep the remote in front of the device which you want to program. Until the process cannot be finished.
Step3: Press and hold the device button that matches your device. Press this button until the indicator light is turned “off” and then again “on”.
Step4: Press and hold the “PLAY” or “SLOW” button from your remote. After this, your remote can find the appropriate code for your device. When it gets the code then your device automatically turns “off”.
Note: After the five to ten seconds your device cannot turn “off”. Then again press the “PLAY” or “SLOW” button for a new list of the code for the device.
Step5: Press and hold down the “REVERSE” or “JUMP BACK” button when your device switch’s “off” for only one time. It turns “on” again your device.
Step6: Press the “STOP” or “OK” button to save the code successfully.
I think by following these steps you can solve your problem easily. If some problems occur or your remote be program successfully then you have to restart the process and try again with attention. If you perform all the steps carefully then also this method is not working then you have to for our another method which we suggest below.
RCA Universal Remote Programming Through “With Code Search Button”:
Step1: Switch “ON” the device which you want to program.
Step2: Find the “CODE SEARCH” button or “SETUP” button on your remote. Press and hold down the button, until the indicator light flashes “twice” to program your device. If your remote having a “SETUP” button then you press the “SETUP” button.
NOTICE: The Universal remote control is compatible with those devices that carry the remote control along with the device. If your device has a remote and you want to replace it with, universal remote then you have to follow these steps.
Step3: Hold the remote control in front of the device you want to program.
Step4: Press the device button for which you want to program. For several devices different buttons are available (e.g., DVD/VCR/TV or cable box). The indicator light blinks for “twice” and remain “on”.
Step5: Press and leave the “POWER” button from your remote until your device turns “off”.
Do this step for 3-4 times until your device found the suitable code. when it gets the suitable code, then your device caught the signal and turn’s “off”.
Step6: Press the “ENTER” button from your remote when your device switch’s “off”. By pressing the “ENTER” button your RCA remote code is saved. If you missed the code then you have to do this process again from step2.
Step7: Check the remote by pressing the “CH+” button. If the remote able to change the channel then your remote is program successfully.
Retrieve the RCA Universal Remote Control Codes:
If in future you forget the code or you miss the channel. So this method is to help you out to solve the problem through RCA universal remote code search function.
Step1: Press and hold the “CODE SEARCH” button or “SETUP” button, until the indicator light is turned’s “on”.
Step2: Press the device button to retrieve the code.
Step3: Press the “CODE SEARCH” button or “SETUP” button.
Step4: Enter the number in order the number pad from your remote and start with “0”. When the indicator light flashes “twice” you got your “first digit” of your code. Start from the beginning, until you get all the “three-digit” of your code.