Easy Steps to Program RCA Universal Remote Code for Sony TV

Are you fed up with using many remote controls at your coffee table? Don’t worry as you have reached the right page and here you will get the complete solution. Welcome to our ultimate guide to Sony TV codes for RCA universal remote.

 If you have purchased an RCA universal remote to control your Sony television, you will get the complete programming information right here. In this post, we have come up with a detailed list of RCA universal remote codes specially designed for Sony TVs. Moreover, you will find the step by step instructions on how to pair the RCA remote with the Sony TV.

RCA universal remotes are powerful devices that can replace the usage of multiple remotes for homely appliances. With the right code, they can be linked with TVs, VCRs, DVDs, Blu-ray players, Audio systems, etc.

So, say bye to juggling multiple remotes and take advantage of the one-stop RCA universal remote.

The RCA Remote Codes for the Sony Brand Televisions

If you have Sony TV at your home and its original remote is not working or is misplaced, you can use an RCA universal remote. With this remote, you can control all the devices in your home theatre space very easily.

The only thing you will need is the valid codes for linking the RCA remote with the Sony TV. Here, you will find the best Sony TV codes for setting up the RCA remote.

How To Reprogram An RCA Universal Remote

Pair your RCA Universal Remote with the Sony TV

As discussed above, the success of programming the TV with the remote depends upon the codes. From the list of codes provided, you have to try each one till you pair the Sony TV with the RCA universal remote. Here is the programming guide:

Step-1 First of all, check the batteries of your remote whether they are in good condition or not.

Step-2 Connect the plug of your Sony TV to the electrical socket and turn it on.

Step-3 Then, search for the ‘TV’ button on the RCA remote and tap on it. Press and hold the ‘Setup’ button down for a few seconds.

Step-4 You have to wait till the light of the remote blinks out. This indicates that it is in the ‘Learning Mode’.

Step-5 In this mode, you have to enter the valid four-digit or five-digit code from the provided list of Sony TV codes above.

Step-6 Aim the RCA universal remote to the TV. Tap on the ‘Power’ key and hold it down. Leave the button when the Sony TV fully shuts down.

Step-7 If your TV didn’t shut down, the code entered was invalid and the programming has failed. However, if the TV had switched off, the programming was successfully conducted.

Step-8 After successful programming, check the TV whether responding to other commands and actions. Also, check by pressing the buttons of the remote if it follows or not. You can try the channel, volume and settings buttons of the remote to check the TV response

RCA Universal Remote TV Codes | Program RCA Universal Remote To A TV

Troubleshooting Tips

If your RCA remote does not respond to the provided codes, check out the given tips here.

These are some troubleshooting tips to help you with your RCA remote and run with your Sony TV:

1. Double-check if you have inserted the correct code for your Sony television. Sometimes, a slight mistake can take to unsuccessful programming of the device.

2. Make sure the RCA remote batteries are new and properly inserted. Weak or dead batteries will prevent the RCA remote from functioning properly.

3. While programming the RCA remote with the Sony TV, remain close to the device. The distance can also interfere with the signal transmission.

4. If you have the older version of Sony TV, use the manual code search technique instead of pre-defined codes. This process can sometimes provide you with better results.

FAQs

Where do I buy an RCA Universal Remote Control?

You can purchase the RCA universal remote at any basic electronics store such as Drugstores, Family Dollar, Amazon, Walmart, etc. One of the best parts to discuss about these remotes is their cost. RCA remotes are available for less than 10 dollars. When you are fed up with using multiple remotes, an RCA universal remote is the best choice.

How to Reprogram the RCA Universal Remote?

If you want to reprogram the RCA universal remote with a new television, you have to follow the same programming guidelines mentioned in this post. The only thing to focus on is the code that matches the brand of your new TV. You will get the RCA remote codes in the above code list.

What to do if the Power Button is working and other buttons are not?

There are two chances:

1. You must have used the wrong remote code. Here, you can come around the process again with a different RCA remote code.
2. Your device may not be compatible with the RCA remote. This happens with those gadgets that have many specialized functions. Here, you can switch to a different universal remote.

Conclusion

In short, the one-stop RCA remote control simplifies your home entertainment area. To program your RCA remote with the Sony TV, just use the right codes from the above list followed by the programming steps. It is very easy to handle all your electronic devices with a single RCA universal remote control. We hope this article has helped you.