In the age of digital technology, remote controllers are a crucial component of our entertainment life. Customers of the dish network have access to a variety of remote controls.
You Asked, We Answered
A complete list of the four-digit dish network remote codes and instructions for programming your universal remote are provided on this page.
Dish Network Universal Remote Codes List
To simplify the process of programming a universal remote control for Dish Network easier, the Dish Network Universal Remote Control List offers a complete list of codes for all brands, along with programming techniques.
Dish Network Universal Remote Codes for Samsung TV
1632 , 0766 , 3993 , 0812 , 3970 , 3382 , 2051 , 1903 , 0060 , 0814 , 1060 , 1575 , 0702 , 0030 , 0178
GE Universal Remote Codes for Dish Network
1447 , 0000 , 0047 , 0451 , 0178 , 1547 , 0051 , 1347
Rca Universal Remote Codes for Dish Network
1781 , 4035 , 1756 , 2932 , 2049 , 3717 ,4488 , 4625 , 1147 ,2746 ,0000 ,3183 ,0885 2247 4394 1347 4623 1247 2634 0051 3895 1547 1948 1868 2002 0706 3382 1953 1670 4490 0679 0178 4079 0093 1447 2434 1047 0047 2187 0090 3894 1958 4492 4214 1661
Philips Universal Remote Codes Dish Network
2049 3396 0054 3069 2372 1154 0017 1867 1756 1744 1455 0706 0178 1856 2374 3623 2800 1866 2434 0885 3678 1394 0690 3183 1483 1454
dish network tv remote codes emerson
0178 1661 1886 1665 1963 1944 0154 0180 1864 0463 1394 0451 0236 0623 0171
Dish Network Remote Codes for Sanyo TV
0088 ,3488 ,1756 ,1647 ,4740 ,0706 ,3183 ,0893 ,0799 ,0054 ,2434 ,2049 ,0885 ,1142 ,0178 ,1649 ,0154, 4168
Vizio TV Code for Dish Network Remote
0885 ,3358 ,1756 ,1758 ,3758 ,4723 ,0864 ,4905 ,1499
Bose Audio Remote Codes for Dish Network
1841 3832 1253 0639 4307 3708 4124 3959 1229 1933 4024 1629 3706
Dish Network Remote Codes for Panasonic TV
2264 ,1947 ,1457 ,4743 ,1941 ,1291 ,1480 ,1946 ,0178 ,0051 ,1271 ,0650, 0250
Dish Network Remote Codes for Sharp TV
0706 , 1602 ,4398 ,4507 ,1756 ,0093 ,4121 ,0689 ,4740 ,0688 ,2360 ,0885 ,3519 ,0818 ,2434 ,0851 ,4892 3183 ,0491 ,2183 ,3394 ,0178 ,2049, 4618
Dish Network 4 Digit Remote Codes for Onn TV
1781 , 1447 ,2247 ,1756 ,2434 ,0885, 0178 ,2049 ,3183 ,0706
How to Program Dish Network Universal Remote Control? – Manual Method
Step- 1 The first step to program dish universal remote is to switch on the device and the remote.
Step- 2 Secondly, on the Dish Network universal remote, press the component button “TV.”
Step- 3 After that, press and hold the “Setup” button on Dish universal remote. An LED light will flash on the Dish network remote, indicating the learning mode.
Step- 4 Now, choose the required code from the list of Dish Network 4-digit remote codes given in the above section.
Step- 5 Once you have entered the Dish network universal remote code, point the remote toward the device and press the “Power” button. Keep holding it as soon as the screen turns off.
Note: After completing all these steps, your Dish Network universal remote will work fine with your device. If not, you can choose another code from the above-mentioned list of Dish Network 4 digit remote codes and repeat the steps.
How Can I Program Dish Network Universal Remote Using Auto-Search Method?
In this method, Dish network universal remote codes are gone through a scanning process. One code is scanned at a time to figure out the perfect Dish network 4 digit remote codes for your device. So, follow these steps to find the appropriate Dish network 4 digit remote codes.
Step- 1 Firstly, switch on the Dish network universal remote control along with your device.
Step- 2 Now, tap the component button as per your device (TV, CBL, DVD, OK/SEL) and hold it for 3 seconds. The light blinks, showing that the device is ready to be programmed.
Step- 3 On the Dish network universal remote, press and “Ch+” and “Ch-” buttons. Now, keep pressing the up and down buttons unless the device turns off.
Step- 4 Finally, to verify if the correct code is selected, press the “Power” button. If the device turns on, try to change the channels with the Dish network universal remote to check if the programming is correctly done.
Step- 5 To save the chosen dish network universal remote code, press the “Device” button. The LED will flash twice to confirm the programming.
Ways to Troubleshoot Dish Network Universal Remote Issues
If your Dish Network remote control is not working, you have to troubleshoot the remote. Following are the troubleshooting ways through which you can make the remote work again.
Step- 1 Reset the Dish Network universal remote by replacing the old batteries with new ones. Also, take care that you do not mix the old batteries with new ones.
Step- 2 After entering the Dish network 4 digit remote codes, verify them properly to confirm if the code responds to your device.
Step- 3 After entering the Dish network universal remote code, press the # key until the LED light flashes three times.
Step- 4 If you have tried all the ways and still Dish network universal remote is not working, check your device.
These ways will help you fix your Dish network universal remote control. Also, if these steps do not work, check if your device has any issues.
