How to Program a Samsung TV to a Dish Remote

If you are getting tired with too many remote control or you want to control your Samsung tv with your Dish remote control. Then you have to do programming of your remote control. As well as you need codes for your universal remote control. Here we provide you all the programming instruction which help you out with the problem and all the universal remote codes are mention below. Sit on the chair and take your remote control follow the programming instruction.

Programming instruction for Dish Remote 40.0, 50.0, 52.0, 54.0 Model Numbers:

These remote control model are easy to use as well as they can do work on all type of screen.

Step1: You have to bring your receiver “UP” on screen “MENU”.

Step2: In case you have a model of this remote control “Dish remote control 40.0 series”. Then you have to tap on the “MENU” button “twice” to bring it up.

Step3: In case you have a model of this remote control “Dish remote control 50.0 series”. Then you have to tap on the “HOME” button “twice” to bring up the screen.

Step4: Go inside the “MAIN MENU” after this you have to tap on  the “SETTING” button and from “SETTING MENU” you have to tap on the “REMOTE CONTROL”.

Step5: Now crawl down and tap on the “DEVICE LIST” and choose “TV” option.

Step6: On the next screen, you have to choose the “TV PAIRING WIZARD”. Now you have to check your “DEVICE BRAND” from the “BRAND” list. Tap on the “DEVICE BRAND”. If you didn’t get your device brand then you have to scroll down and check alphabetically on the left sidebar.

Step7: Scroll down till you didn’t get “S-T” if you get then tap on it. Now you can see your device brand name tap on it. Now tap on the “Next” button to start the process of enter the codes.

Programming instruction for Dish Remote 20.0, 21.0, 20.1 or 21.1 Model Numbers:

In this paragraph we discussed about the older Dish remote 20.0 series. In this model of remote control you need an Dish Remote Codes. Here you get the manual of your remote control for older Dish remote control series. But for this model of remote control we have only 8 remote codes for Samsung device.

You have to press and hold the “TV” button from your remote control. Till the 4 LED light of “MODE” button is not lit.

Now, you have to enter the Dish remote codes and you have to also tap on the “#” button from your remote control.

After this, you can see the “TV” button blinks 3-times. You have to wait till the code is not accepted. Now you can check by pressing the “POWER” button. If your device is turned “OFF” normally it’s mean you perform the programming instruction correctly. If your device is not turned “OFF” then you have to perform all the programming steps again with another code.