4 digit GE universal remote Blu-Ray Player & Program Guide

As we all know, the Blu-Ray Player device comes with a remote control but what if your remote stops working or gets misplaced? Don’t worry!! GE Universal Remote will play as a major solution for all your problems.

With this remote, you can control your Blu Ray Player stock or any other Blu Ray Player device without any hassle. But before you use it, the only thing you need to do is to program the GE Universal remote with your Blu-Ray Player stick or any Blu-Ray Player device.

You can easily program the GE Universal remote with Blu-Ray Player, DVD, TV, and many more.

Just follow some simple and quick steps and your GE Universal Remote is ready to use. Programming can be done using different ways. The methods are – the auto-search method and the manual method.

4 digit GE universal remote Blu-Ray Player

How to Program GE Blu Ray Player Universal Remote Manually?

• Firstly, switch on the Blu Ray Player TV or any other Blu Ray Player electronic device you wish to program with a GE Universal Remote via Blu Ray Player GE Universal Remote Codes.
• Press the “TV” button. Now, hold the Blu Ray Player GE Universal Remote in front of the Blu Ray Player TV and press the Setup button till the light blinks.
• Subsequently, enter the Blu Ray Player GE Universal Remote Code from the Blu Ray Player GE Universal Remote Code List for Blu Ray Player TV.
• After this procedure, point your remote towards the TV and hold the Power button.
• The screen will “Turn Off”. Now, your GE Universal Remote for Blu Ray Player TV is ready to use.
• If the code doesn’t work properly or shows an error, then try a different code from the code list and follow the above steps.

How can you Program Blu Ray Player Universal TV Remote without Codes?

• Switch on your Blu Ray Player TV or DVD, CBL, etc. And press the OK/SEL buttons on the GE Universal Remote for 3-4 seconds.
• The LED light on your Blu Ray Player device will blink which indicates that your remote is ready to get programmed.
• Now point and press the “CH+” and “CH-” buttons on the remote. There will be a signal displayed on the remote showing On/Off.
• You have to continuously press the “up” or “down” keys until the device turns off.
• Once the device turns off, switch it on again to recheck the code. If it starts, then your GE Universal Remote is correctly programmed.
• You can even save the code by switching on the device and the LED light will blink twice. This will confirm that the code has been stored.