There is too much variety of the One for all universal remote control. It is designed to control your three device. Now you think you will be able to control 3 devices through a single remote control. Now, you didn’t get to tangled with remote control.
You Asked, We Answered
But here we discussed about “One for All Remote Codes Urc-3021 and programming methods ”. Here you get all the one for all urc3021 universal remote codes. As well as we also mention all the programming instruction. All the programming instruction given below.
One For All URC3021 Remote Codes
| Brand | Code |
| Toshiba | 0000 |
| Panasonic | 0107 , 0000 |
| Samsung | 0144 |
| Motorola | 0810 , 0276 , 0476 |
| Philips | 0317 , 0305 |
| Bell South | 0899 |
| Zenith | 0899 , 0000 , 0525 |
| GoldStar | 0144 |
| Americast | 0899 |
| Jerrold | 0276 , 0476 , 0810 |
| Quasar | 0000 |
| Hamlin | 0009 |
| Pioneer | 0533 , 1877 , 0877 , 0144 |
| Memorex | 0000 |
| Runco | 0000 |
| Sony | 1006 |
| Director | 0476 |
| Pace | 0237 |
Setup Codes for DVD Players
| Brand | Code |
| RCA | 0807 , 0240 , 1060 , 1035 |
| Sanyo | 0670 |
| Samsung | 1075 , 0573 , 0820 |
| Toshiba | 0503 |
| Zenith | 0591 , 0503 |
| Mitsubishi | 0807 |
| RadioShack | 0000 |
| Symphonic | 0675 |
| Sony | 0864, 0533 , 1033 ,1533 |
| Sylvania | 0675 |
| Yamaha | 0545 , 0490 , 0539 |
| Rotel | 0623 |
| Panasonic | 1035 , 0162 |
| Sansui | 1479, 0000 , 0479 |
| Xbox | 0522 |
| Technics | 0490 |
| Optimus | 0162 |
| Sears | 1237 , 0000 |
| Thomas | 0000 |
| Pioneer | 0571 , 0525 |
| Panasonic | 1762 , 0490 |
| Daewoo | 0784 |
| Emerson | 0675 , 0591 |
| GE | 0717 , 0522 , 0815 |
| Hitachi | 0573 |
| Magnavox | 0675 , 0503 |
| Symphonic | 0000 |
| Mitsubishi | 1521 , 0521 |
| Proscan | 0522 |
How to Program One for All Remote Control Urc 3021
If you tried lot to make your remote control to make compatible with your device. And you didn’t successful then you can use this programming method.
Note: If you are using this programming instruction to program your DVD player or a VCR. Tap on the “POWER” button to “ON” your device. And please insert any media disk before programming.
Step1: From your “One for all urc3021 universal remote control” press on the “TV” button.
Step2: Now, tap on the “SET” button from your remote control. Press the “SET” button until the “RED” light blinks “twice”. Then release the “SET” button.
Step3: now enter the “9-9-1” code by using your remote control number pad. After entering the code led light blinks “twice”.
Read More : Best One for All Remote Codes List
