Steps to Program a Viper 474V Remote control
  • Post author:
  • Reading time:2 min(s) read

Among the various Viper remotes, Viper 474V is the one that can be programmed to control multiple features on your car. It has four buttons. The Viper 474V remote lets you control the alarm system remotely.

The remotes are synced to the transmitter system. This system can be installed by an automotive store or at the dealership. Once installed, you can program the remote yourself in just a few quick steps from your driver’s seat. Following is the sequence of steps to program and use the remote correctly.

Step 1. Firstly, enter your car and leave the driver’s door open. Now, insert the key into the car’s ignition and turn it to the “On” position.

Step 2.  To program the alarm, press the “Valet” button one time on the Viper  474V remote. To program your trunk release, push the button twice and program the remote starter, press the Valet button thrice.

Step 3. As per the function, you are programming the remote in the previous step, listen to the car horn chirp one, two, or three times and press and hold the “Valet” button again.

Step 4. Now, press and release the button on Viper 474V remote that you want to program while holding the “Valet” button.

To confirm the successful programming, wait for the car horn to chirp again. Now release the “Valet” button to end the process.

Summing  Up In the above section, we have explained the proper steps to program Viper 474V Remote very easily. You can use this remote to control various features in your car