Summit TV Universal Remote Codes: Easy Setup Guide

You will need a Summit TV remote control code to program your universal remote to Summit TV or another brand of TV. This post describes the following codes.

There are a number of Universal Remote Control codes listed below. We have provided more than one code for each brand.

If one code doesn’t work, try another. The code is usually a 4-digit number.

How to program the Summit RV TV Universal Remote with automatic search

With the automatic search method, all universal remote control codes are scanned on the remote control. The codes are scanned one by one to find the correct remote code that works with the remote to program the controller. Follow the instructions below:

Step 1.” Turn on” the smart device as the “television” you want to use with the universal remote control.

Step2.Turn on the remote control and touch the device button (TV, DVD, CBL, and OK / SEL) for 3 seconds. The LED display indicates that the device is ready for programming.

Step3.Point the remote control at the device and click the “CH +” and “CH-” buttons. The remote control displays an on / off signal. Press the up or down button repeatedly until the device turns off.

Step4.Check the code by clicking the On / Off button. The device must be turned on. When starting up, try changing the channel to make sure the remote has been programmed correctly.

Step5.Now tap on the “Device” button to save the code. The device LED flashes twice to confirm the stored code.

How to program the Summit Universal Remote Control Manual Setup

Step 1: Turn on the TV.

Step 2: Hold the universal remote control for your TV so that it faces what you want to program.

Step 3: Search for the “SETUP” button on your universal remote control. A red light will appear on your universal remote control. “TV”, if you wish to program your television. Select “CBL” for cable and “Sat” for satellite box.

 Step 4: You will see a field to enter the remote code. Find the correct code from this article and enter the fields.

Step 5: If you have done the process correctly, the dim light will flash four times. When appears, choose one of the codes above for your device and enter it. The button light will turn off as soon as you receive the correct code. If not, try another code.

 Step 6: Press one of the function keys on the remote control. If it works, then you are following the steps correctly. If that doesn’t work, repeat the steps and try another code.

How to program the Summit RV TV Universal Remote with Code Search

If you cannot find a suitable lock code for your device at this time, you can set the universal remote control to the correct one in search mode. This is a manual mode code that forces the remote control to search mode

Step1: First “activate device”

Step2: Now hold down the “Setup” button

Step3: Enter the code “9-9-1” (three digits)

Step 4: Now hold the “power button” on the remote control and push the channel upwards until the device turns off the TV.

The method above may take some time, but finding your lock code is very important. After the above process, your remote control will work for all functions.