Creating one single universal remote for all  instead oif juggling between multiple remotes is the best solution. Opting for a universal remote saves you from handling of these remotes and enables you to control your devices without any hassle. Stereo Audio Receivers Universal Remote codes make this job easy for you.

Stereo Audio Receivers Remote Codes are used to program your remote with Stereo Audio Receiver easily. Usually, an electronic device comes with a remote but in case, if it gets misplaced or damaged, then you can use a universal remote code to program your devices.

Brand Code
Bose 1629, 1841, 1933
Dynex 2971
Hitachi 1273, 1801
Insignia 1030, 1077, 1751, 1893, 2126, 2169, 2175, 2472, 2929, 2966
LG 1293, 2197, 2284, 2676
Magnavox 1189, 1269, 0189, 0531, 1514
Panasonic 1308, 1518, 1275, 1288, 1316, 1548, 1633, 1763, 1764, 2105, 2221, 2452, 2967
RCA 1023, 1609, 1254, 0531, 1390, 1511, 2041, 2611
Samsung 1295, 1304, 1500, 1868
Sanyo 1801
Sony 1759, 1058, 1441, 1258, 1622, 1558, 1658, 1758, 1822, 1858, 2172, 2475, 2522
Toshiba 1788
KLH 1390, 1428
Vizio 1517
Integra 1298, 1320, 1805
Yamaha 0176, 0376, 1176, 1276, 1331, 1375, 1376, 1476, 1815, 2061, 2455, 2467, 2471 
Optimus 1023, 0531
Sansui 0189
Amphion Media 1563
JVC 0531, 1374, 1495, 1871, 2040, 2161, 2239, 2331
Venturer 1390
iSymphony 2258, 2442
Wards 0189
Sherwood 2169, 1077, 1517, 1905, 2169
Micromega 1189
Liquid Video

1497
iHome 2435
Regent 0931

Sonic Blue
1869
Apex Digital 1257, 1430, 1774
Aiwa 1405, 0189, 0121, 1388, 1641
Marantz 1189, 1269, 0189, 1289, 2114
Stereophonics 1023
Technics 1308, 1518, 1633
Onkyo 0842, 1298, 1320, 1531, 1805, 2451
Magnavox 1831
Philips 1189, 1269, 0189, 1266, 1831, 2311, 2459
Thorens 1189
Denon 2857, 1360, 0176, 1142, 1460, 2247, 2279, 2516, 2820
Linn 0189
Oritron 1366, 1497
Teac
1390, 1528
Alco 1390
Proscan 1254
Pioneer 1023, 0176, 0531, 1384, 1935
Koss1366, 1497
Norcent 1389, 1751
Sunfire 1313
Nova 1389
Polk Audio

0189, 1289, 2270
Nakamichi 1313
Harman/Kardon 0110, 0189, 1304, 1306, 2241, 2443
McIntosh 1289
Myryad 1189
 ADC 0531
NexxTech 1751
Rio 1869
Gateway

1517
JBL 0110, 1306, 2241

AMW
1563
Kenwood 1313, 1569
Audiotronic 1189
Carver1189, 0189, 0121
Arcam 1189, 0189
Audiovox 1390
AMC 1077
Fisher 1801
Boston Acoustics 2162
Anam 1609
Coby1389, 2127
Daewoo 1250
Capetronic 0531

How to program Stereo Audio Receivers Universal Remote Manaully?

1. Switch on your Stereo Audio Receiver.

2. Select one of the device control codes from the given Stereo Audio Receivers Universal Remote Code list 4 digits.

3. After that, Take your remote control, press the Code Search Button and hold for 2-3 Seconds until the remote’s LED light is blinking. After that, release the remote button,

4. After that, Press the device selection button such as TV on Stereo Audio Receivers Remote Control.

5. Enter your Stereo Audio Receivers Universal Remote device codes. The light will turn off. A tiny LED light will start blinking 4 times.

6. As soon as it blinks, choose any code from the above list and enter into your device. The corect code will switch off the light. If it shows an error, then, try another code.

7. Now, your Stereo Audio Receivers Universal Remote is connected with your devices. You can test the code by pointing it towards your device and press on the on/off button.

How to program Stereo Audio Receivers Universal Remote using Auto-Search Method?

1. Power on your smart device like Television that you want to program with Stereo Audio Receivers Universal Remote control.

2. Find the Code Search Button on your device and press to hold for 3 seconds until the LED Light is on.

3. Now, point the remote towards the TV and click CH+” &“CH-“switches. The remote will show you on/off signals. Now, press the “up”or“down”key continuously and the device will turn off.

4. As soon as the device turns off, try to power on the tv to verify your entered code. The device will turn on if the code is correct. Now, try changing the channel with your Stereo Audio Receivers Universal Remote and check if the remote is programmed correctly.

5. Press the “device” button. The code will be saved. The device LED will blink twice for confirming the code stored.