Sanyo TV can be set up with the use of various different remote controls which allows them to turn off the TV or adjust its volume, among many other features. Universal remote controls are flexible to operate all your audio/video devices.
Successfully setting up the Universal Remote Codes for Sanyo TV – Manual Controls with a remote merely requires determining the type of remote you have and following the setup process for each kind.
How to Program a Sanyo Universal Remote
Here are the steps to program SanyoTV with a Universal Remote
- Program Universal Remote Codes for Sanyo TV Through Keycode Method
With the use of keycode method we can easily program a universal remote where the keycode identifies the make and model of your equipment which you’re programming.
1. “Turn On” the Device which you wish to program.
2. Tap on the “TV” button on your “Sanyo Device Universal Remote”
3. Press and hold the “Setup” button of the Universal Remote until it shows the “Light Flash” which means it is in “Processing mode”.
4. Enter the “Keycode” which you collected from the programing guide or the Instructions Booklet.
5. Now aim your remote at the TV and then press and hold the “Power” button the remote will begin sending codes stored in its system to the device
And release the “Power Button” whenever the screen switches off.
Your TV will work smoothly now with the universal remote control.
If your device is not working then try to repeat the same steps with the alternate code.
(i.e 0004, 0110, 0097, 0268, 0012, 0108 or 0180 etc
- Program Universal Remote Codes for Sanyo TV Through “Code Search Method”:
If you were not able to find the key code which works for the device, at that time you can set up your universal remote to search mode for the correct one. Basically, its a code in manual which turns the remote into the search mode
1. “Turn On” the device.
2. Press and hold the “Setup” button
3. Enter the three digit code
4. Hold on the “Power” button on the remote and then press the Channel up, the device, in this case, will “Turn Off”
This method may take some extra time or few minutes.
Once you have done the above steps your remote should be working for all the in functions.
- Program Universal Remote Codes for Sanyo TV Through “Manual Setup Method”:
If the above two methods can’t be helped to you then the final method is “Manual Setup”, if you confirm the universal remote control manually your device can work perfectly.
1. Aim the Device facing to the Universal remote control you want to program.
2. Press the “Setup Button” and enter the “Code” which you can find in Instruction Booklet.
3. For manual programming press any of the function which you want to “program” for example “TV Volume Up”
4. Press And hold the corresponding key on the “Original Remote Controller”
5. One of the lights will “blink” that means it has been saved correctly.
Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.
With the above three methods, we can easily Program Our Sanyo TV Device with Universal Remote.
3 Digit Universal Remote Codes for Sanyo TV
sanyo 3 digit codes |
---|
• 069 |
• 054 |
• 004 |
• 049 |
• 180 |
• 110 |
• 209 |
• 108 |
• 013 |
• 025 |
• 023 |
RCA Universal Remote 4 Digit Codes for Sanyo TV
Sanyo 5 Digit Codes |
---|
• 0170 |
• 0108 |
• 2676 |
• 1585 |
• 0556 |
• 0292 |
• 0370 |
• 0373 |
• 0208 |
• 2461 |
• 1163 |
• 2279 |
• 1208 |
• 0264 |
• 1667 |
• 0009 |
• 0508 |
• 1037 |
• 0486 |
• 0412 |
• 0036 |
• 0037 |
RCA Universal Remote 5 Digit Codes for Sanyo TV
Sanyo TV Codes |
---|
10146 |
10232 |
10798 |
10893 |
10107 |
14675 |
10036 |
10088 |
10154 |
11362 |
11142 |
10159 |
13488 |
10799 |
13547 |
10054 |
10484 |
11907 |
Universal Remote Codes for Sanyo DVD Player
Codes for Sanyo DVD Player |
---|
1919 |
0896 |
0873 |
0670 |
2050 |
2393 |
0790 |
0695 |
Sanyo TV Codes for Sony Remote
- 335
- 330
Comcast Xfinity Remote Sanyo TV
- 10159
- 10154
Cox Remote Codes for Sanyo TV
- 0799
- 0054
- 1142
- 0088
- 0154
One for All Universal Remote Codes for Sanyo TV
0012 |
---|
0180 |
0049 |
0004 |
0108 |
0110 |
0097 |
0268 |
Sanyo TV Codes for DirecTV Remote
SANYO DirecTV Codes |
---|
10484 |
10893 |
11142 |
10208 |
10154 |
10107 |
10088 |
10799 |
10159 |
10146 |
10232 |
10339 |
Sanyo Soundbar 3 Digit Remote Codes
- 590
- 683
- 627
- 611
- 661
Sanyo Soundbar 5 Digit Remote Control Codes:
- 20081
- 10250
- 20047
- 21593
- 20039
- 30189
- 10159
- 10154
- 20035
- 10051
- 30531
- 21781
- 20000
- 20149
Read Also : How to Program a GE Universal Remote to a TV Without Codes