Sharp TV Codes for Universal Remote Control & Setup

If you have recently replaced a home entertainment component, such as a television, home theatre, or audio device, your Sharp TV Universal Remote may need to be reprogrammed to control the new device.

This article will teach you the programming method of using Sharp TV Codes for a Universal Remote Control to pair with a new device with one remote control.

Note: Sharp TV remote programming codes vary by specific device brand. Read the following sections of this article to know more about the method of using Sharp TV Codes for Universal Remote Control according to the device model.

Sharp TV Codes for Universal Remote Control

Check the list below for Sharp TV Codes for Universal Remote according to the specific device model. Here you can find suitable two, three, or four-digit codes for programming your Sharp TV Universal Remote

.

Ge Universal Remote Codes For Sharp Tv

0122 0020 0095

0009 0123 0004

0063 0079 0266

0226 0006

How to Get GE Universal Remote Codes & Program Guide

Sharp Tv Codes For Xfinity

11801 , 10078 , 12049 , 11407
11089 10165 12285 10854
10032 10491 12286 11670
12183 12284 10093 10153
12434 10036 10178 11602
10706 12360 11756 13867
10386 10851

Comcast 5 Digit Remote Codes For Sharp Tv

10093 , 10165

Sharp TV Code for One for All Remote

0266 , 0122 0004 0020 0226 0006 0095 0009 0079 0063

Spectrum Remote Control Codes For Sharp Tv

10851 , 11602 , 10093 , 12360 , 10688 , 11756 , 10818

Sharp Tv Codes For Xfinity Remote

10165 10093

RCA Universal Remote Control Codes For Sharp Tv

How Do I Program Sharp TV Without a Universal Remote Control?

1173 , 1122 , 1265 , 1196 , 1423 , 1171, 1437, 1261, 1006, 1004
1372 , 1357 , 1095, 1111, 1447, 1029 , 1012 , 1026 , 1443 , 1112, 1113

What Is the 5-Digit Code for Sharp TV

10171 11963
11641 11326
11892 11517
10748 11660
10463 10171
11463 11204
11314 12002
11785 11326
11963 11204
11710 11780
10178 11517
11641 12183
11780 12002
10019 11564
10748 11314
11660 12049

Rca Universal Remote Codes For Sharp Tv

1095 1029
1423 1004
1372 1026
1122 1173
1171 1265
1261 1196
1112 1113
1357 1006
1447 1437
1012 1443

Directv Remote Code For Sharp Roku Tv

10818 11756

4 Digit Code For Sharp Tv

1064 1097
1078 1362
1099 1312
1378 0039
0386 1009
1004 0165
0093 1011
1153 1077
1375 1025
1311 1298
1274 1081

Dish Network Sharp Tv Codes

0178 0688
4618 4507
2049 2183
3183 4740
4398 1756
2360 0885
2434 0689
0093 0706
3519 3394
0818 4121
4892 0851
0491 1602

Dish Remote Control Codes For Sharp Tv

3519 0851
2360 4121
4398 0706
0885 0689
0093 4507
1602 4618
0178 2434
2049 3183
2183 0818
0688 4892
3394 1756
0491 4740

Philips Universal Remote Codes For Sharp Tv

0224 0002
0913 0907
0813 0509
0202 0603
0111 0228

Magnavox Universal Remote Codes For Sharp Tv

11602 10818
12360 10093
10688 11756

Sharp Tv Codes For Spectrum Remote

11602 10818
12360 10093
10688 11756

Direct Tv Remote Code For Sharp Tv

10818 10689
10688 10093
10851

Onn Universal Remote Codes For Sharp Tv

5074 5028
5010 5065
5045

Sharp Tv Codes For Directv Remote

10688 10818
10689 10093
10851

To start programming your devices using one remote, ensure that they’re functioning properly and also the batteries on the remote are working.

This will eliminate hassles while setting up the remote. To be able to take control of other devices using the sharp tv remote, here are the following programming steps: Program the Sharp TV Universal Remote

How to program Sharp TV Codes for Universal Remote

  1. “Turn on” the specified home entertainment component.
  2. “Depress the CH+ button” along with the specific “device button” for at least 5 seconds.

[Tips: In some cases, you may need to depress only the device power button.]

  1. After that you need to enter the “two or four-digit device code” while pressing the “device button”.

[Tips: If you need to enter the four-digit code follow the same method.]

  1. “Release the device button” after entering the Sharp TV Codes for Universal Remote Control

[Tips: You must follow this step after entering any code to finish programming the remote.]

  1. “Turn off” your device by depressing the power button of your Sharp TV universal remote.

[Tips: You can also verify remote functionality by trying volume up/down and changing channels.]

How to Program Sharp TV Remote

1. Switch On the device you want the remote to control or program.

2. Point the remote directly toward the device that has been turned on.

3. Press and hold down the device button (i.e. VCR, DVD, etc) and CH+ up button for a few seconds.

4. Enter the code that corresponds or matches to the device and brand. The code might be found in the manual given below of the remote otherwise you can search that on the web.

5. The indicator light in the remote will stop blinking after the correct code is entered.

6. Press the device button to save the code.

7. Press the Power button on the remote. If the device responds to the remote, this ensures that the programming is successful.

Note: If the device does not respond to the remote, repeat the process again, and enter a different code. If successful, repeat the process for every device which you want to program with the universal remote.

Disable the Sharp Universal Remote Codes

If you are contemplating a new entertainment setup and wish to disable the codes from one of your devices controlled by “sharp tv remote codes”, here are the easy steps on how:

1. Remove the batteries from their compartment located at the back portion of the remote. Usually, most of the universal remotes for sharp tv are powered by two or four AAA cells.

2. Leave the battery compartment empty for about 2 minutes. While the batteries are changed “sharp tv remote” stores power within the capacitor which provides an intact memory. Allowing a minimum of 2 minutes will make the stored power begin to empty.

3. Force the remote to empty all the facility stored within the capacitor by pressing the holding the facility button.

4. Keep on pressing the facility button to form sure that no signal fire is approaching. Once the capacitor is drained, all the codes stored for operating the devices will be cleared.

5. Replace the batteries.

6. Repeat the sharp remote codes for all the selected devices you want the Sharp universal remote to take control of.

7. The “universal remote for sharp tv” is easy to use yet powerful enough to control the entertainment devices in your room. When universal remote codes are properly programmed, you’ll cash in of ease fun, and convenience in controlling your devices.

Read Also: Universal Remote Codes for Sanyo TV – Manual Controls

Read Also: How to Program a GE Universal Remote to a TV Without Codes

Leave a Reply

Your email address will not be published.

Back to top button