Rca Universal Remote Codes for Digital Converter Box

Here you get all the remote codes for RCA digital converter box to tv. Through which you can easily program your device. There are various methods and codes available to program your remote control but here you get a universal method and code list which help to program your remote control. So, let’s start the programming.

Converter Box Remote Codes

BrandCodes
GE053, 063 , 123, 135, 149 , 001 , 018, 039, 040, 005 ,122
RCA073 , 075, 076 , 078, 135 , 000, 001, 005, 072, 074,077
Sony 175 , 247, 251 , 308 ,003, 146, 151, 152, 228 ,303
Samsung145 , 195 , 213, 216 , 013, 079, 080, 177 ,202 ,005
Westinghouse 188 , 235 ,175 , 226
Sansui189
Panasonic 045 , 179, 187, 254 , 288 , 301 ,040 ,125, 257 , 299
LG 260 , 275 , 221 ,274
Hitachi 005 , 100, 101 , 103, 105, 110 ,107 ,043 ,102 ,044
Emerson021, 022, 026 , 005, 019 , 024, 025,027 ,023 ,020
Toshiba 052 , 080, 090, 121, 184 , 198, 231 ,195 ,037,053
Mitsubishi 018, 058 , 183, 197, 217, 260 , 274 ,005 , 094 ,262
JVC 044, 046, 047 , 136, 157, 180, 263 ,040 ,118 , 119 ,048
Philips Magnavox 185, 230 , 258, 270 , 279 ,253 , 273 , 181
Hisense190
Funai 139 , 186 ,036 ,185
Benq 306, 204
Sanyo 082, 083, 198 , 274 ,037 ,124,268
Magnavox049, 050, 054 , 007, 045, 064, 097, 098 ,005 ,055

Sharp
021 , 085, 183,071 , 208, 274, 298 ,005
Sylvania 050 , 055 , 121 , 005 , 045, 049,054 ,064 ,007 ,088
Craig186
Philips 045 , 050, 054 , 062, 063, 065, 181 ,049 , 064 , 007

How to Program a Universal Remote to a Converter Box

NOTE: Keep your remote control in front of your device which you want to program. As well as remove those thing which disturb the remote signals.

Step1: Tap on the “PROGRAM” button from your remote control. Press the button until the “LED” light is not lit.

Step2: Go on the table and find out the 3-digit codes. After that enter the codes by using the number pad of your remote control.

Step3: Now you can see the configuration shows on the screen. You have to tap on the “OK” button to save the configuration.

You can see the “LED” light blinks. This means is you get the right process. If the “LED” light is not blinked then select another code and start doing programming again.

Step4: Check your remote control by pressing any function key from your remote control. You can tap on the “VOL+” button if your device volume increase then your remote control is programmed.

Back to top button