There comes a situation where we have multiple devices such as television, audio system, etc. All these devices come with their remotes. This might create chaos sometimes to handle all these devices with their respective remote controls. Universal remotes are the best solution for such scenarios. Are you looking for a solution to Program Spectrum Remote ur5u-8780l-Twc with your devices? If yes, you will find the complete stepwise solution along with the codes list to program Spectrum Remote UR5U-8780L-TWC. All you need to do is to follow the given steps, and you are done!

We have explained the auto search method to program your universal remote with the device. In this method, the device scans all the codes one by one and chooses the best fit. Apart from the process to connect Spectrum Remote UR5U-8780L with your devices, we have given a complete list of UR5U-8780L-TWC universal codes.

Complete List Of Spectrum Remote UR5U-8780L Codes

Samsung228 , 258 , 050 , 363 , 143 , 333 ,229 , 655 , 515
Toshiba230 , 138 , 030 , 703 , 007 , 325 , 258
Cisco003 , 042 , 041 , 045 , 046 , 001
LG569 , 363 , 102 , 113 , 112 , 143 , 284 , 648 , 116 , 741
Vizio624 , 387 , 625 , 675 , 386
Sharp143 , 175 , 251 , 028 , 363 , 019 , 684 , 308 , 735 , 692

Sony702 , 608 , 646 , 651 , 001

Read Also : How to Program a Spectrum Remote Control Code Step by Step

Steps to Program Spectrum Remote UR5U-8780L – Auto-Search Method

In the auto search method, the scanning is done through all the codes one by one to Program Spectrum Remote UR5U-8780L-TWC. Follow the given steps.

Step1: Firstly, turn on the device that you want to program with UR5U-8780L-TWC Universal remote.

Step2: Now, press the corresponding component button for your device. Along with that, press the Select/OK button and hold for 3 seconds.

Step3: The LED will get lit. This shows that your device is now ready to be programmed.

Step4: Now, hold the Spectrum Remote UR5U-8780L pointing towards the device. Press the Vol+ and Vol- buttons.

Step5: With this, the universal remote will give the device on and off signals.

Step6: Till your device turns off, keep pressing the Vol+ and Vol- buttons.

Step7: Now, press the power button to confirm that the code has been correctly selected.

Step8: After pressing the power button, your device will turn on. Now press the volume buttons to verify that the remote works properly.

Step9: Finally, press the device button to save the code in the memory. The LED will blink twice to confirm the successful programming of Spectrum Remote UR5U-8780L-TWC.

Summing Up

Universal Remotes are always the best if you want to avoid multiple remotes for multiple devices. In the above write-up, we have mentioned the method to program Spectrum Remote UR5U-8780L-TWC step by step. Also, we have given the complete code list for your UR5U-8780L-TWC remote setup.