To make an RCA Digital TV work with, converter box, you need to convert the remote into a universal remote via RCA Digital TV Converter Box Remote Codes. There are numerous RCA Digital TV Converter Box Remote Codes available to program your RCA Digital TV Remotfor Converter Box. Just try different codes and from the list of all the remote codes that can be used to program your universal remote code for RCA Digital TV Converter BoxTV.

This guide will help you to understand and program your RCA Digital TV Universal Remote with Converter Box via RCA Digital TV Converter Box Remote Codes. The codes can be either in 3 digits, 4 digits, or 5 digits Remote Codes. All you need to do is just enter the remote code and program your RCA Digital TV Remote with the Converter Box.

Rca Digital TV Converter Box DTA800 Remote Codes

Rca Digital Tv Converter Box Dta800 Remote Codes For Vizio Tv

235204

Rca Digital Tv Converter Box Dta800 Remote Codes For Samsung Tv

195216
079202
080145
005177
213013

Ge Universal Remote Codes For Rca Converter Box

123040
135149
039063
122053
001005
018

Rca Universal Remote Codes For Magnavox Converter Box

054098
050097
007045
049055
064005

Rca Universal Remote Codes For Insignia Digital Converter Box

309189
244

Rca Digital Tv Converter Box Code For Toshiba

184037
121198
053231
090052
195080
BrandCode
Sony 228 ,303 , 308 , 146,175 , 151, 152,247, 251 , 003
Samsung 080 , 213
,005 , 013 , 216 , 195 , 079 , 202 , 177 ,145
Radio Shack 186, 198 , 178 , 001 ,274 , 037 , 177
RCA 000 , 073 , 076 , 078 , 005 , 135 , 077 , 072 , 075 , 074 , 001
Universal 063 , 039
Toshiba121 , 052 , 198 , 053, 195 , 184 , 080, 090, 231 , 037
Emerson020, 026 , 023 , 021,025 , 019 , 027 , 005 , 024 , 022
Haier 242 , 173
Sanyo 082 , 083, 274 , 124, 198, 268 , 037
Sansui189
Westinghouse226, 188 , 235 , 175
Panasonic 299 , 125 , 288 , 257 , 045 , 301 , 254 , 187 , 040 , 179
Durabrand 189, 186 , 274 , 185 , 173
Zenith113, 245 , 248, 274 , 114, 189 , 115, 176, 182,002
Sharp208 , 274 , 085, 087,071 , 092, 298 , 005 , 128, 183,021
Sylvania 045,088 , 007 , 049, 121 , 050, 054, 055,064 , 005
Philips 049, 064, 065, 007, 045, 063, 181 , 050, 054, 062,
Mitsubishi260 , 018, 262, 274 058, 197, 217 , 094, 183 ,005
JVC044, 046, 040, 157 , 047, 048 , 263 , 118, 119, 136,180
Vizio235 , 204
Yamaha177 , 274, 260 , 275 , 005
Philips Magnavox 230, 273, 279 , 253, 185, 270, 258,181
Magnavox 049, 007, 045 , 050, 054 , 064 , 097 , 098 , 005 , 055
Sears053 , 135, 139, 163 , 001 , 052 , 037 ,084 ,047 , 036 , 005
Hitachi103 , 044, 107, 005 , 110 , 105 , 100, 101, 043 , 102

How to Program RCA Digital TV Converter Box Universal Remote Manually?

1. Firstly, switch on the Convertor Box or any other electronic device you wish to program with an RCA Digital TV Universal Remote via RCA Digital TV Converter Box Codes.

2. Press the “Converter Box” button. Now, hold the RCA Digital TV Converter Box Universal Remote in front of the Convertor Box and press the Setup button till the light blinks.

3. Subsequently, enter the RCA Digital TV Converter Box Universal Remote Code from the Remote Code List.

4. After this procedure, point your remote towards the Converter Box and hold the Power button.

5.  It will turn off. Now, your universal remote for the RCA Digital TV Converter Box is ready to use.

6. If the code doesn’t work properly or shows an error, then try a different code from the code list and follow the above steps.

How to Program RCA Digital TV Converter BoxTV Remote without Codes?

Switch on your Converter Box. Press the OK/SEL buttons on the universal remote for 3-4 seconds.

The LED light on your Convertor Box will blink which indicates that your remote is ready to get programmed.

Now point and press the “CH+” and “CH-” buttons on the remote. There will be a signal displayed on the remote showing On/Off.

You have to continuously press the “up” or “down” keys until the device turns off.

Once the device turns off, switch it on again to recheck the code. If it starts, then your universal remote is correctly programmed.

You can even save the code by switching on the device and the LED light will blink twice. This will confirm that the code has been stored.