List of Magnavox DVD Universal Remote Codes
A Magnavox DVD universal remote can be used to control any brand device. All you have to enter is the correct code from the below list that will match the make and model of the device. After entering the code, you have to perform the programming instructions carefully. Check out the codes given below for programming your brand Magnavox DVD player or other brand devices.
|LG||0504 , 0515 , 0440 , 0457 , 0457 ,0430|
|RCA||0436 , 0464 , 0400 , 0411|
|Magnavox||0454 , 0452 , 0525 , 0513 , 0407 , 0427 , 0522|
|Hitachi||0531 , 0408|
|Philips||0427 , 0523 , 0472 , 0522 , 0452 ,0512 , 0525 , 0524 , 0454 , 0448 , 0407|
|Samsung||0470 , 0408 , 0503 , 0424 , 0505 , 0475 , 0406 , 0461 , 0435 ,|
|Sanyo||0441 , 0428|
|Panasonic||0459 , 0510 , 0406 , 0458 , 0407|
|Sony||0443 , 0403 , 0401 ,0453 , 0404 , 0455 , 0402 , 0432 , 0501 ,|
|Pioneer||0473 , 0423 , 0519 , 0411 , 0456 , 0426|
|Integra||0463 , 0532 , 0411|
|Onkyo||0463 , 0506 , 0407 , 0532|
|CyberHome||0444 , 0433|
|Apex Digital||0442 , 0405 , 0437|
|Disney||0449 , 0427|
|Go Video||0430 , 0440 , 0529 , 0429|
|Insignia||0477 , 0427 , 0462 , 0507 , 0471 , 0499|
|Toshiba||0467 , 0478 , 0407 , 0500 , 0460 , 0428|
|Mitsubishi||0410 , 0409|
|Yamaha||0434 , 0425 , 0522 , 0521 , 0525 , 0406 ,|
|Polaroid||0450 , 0442|
|GE||0528 , 0400|
|Zenith||0440 , 0430 , 0407|
How will you program a Magnavox DVD Universal Remote without any Codes?
All the Magnavox DVD universal remote codes are passed through scanning process in the auto search method. It scans a single remote code at one time to get the right key code working with your Magnavox DVD universal remote to program the controller with the device. The step-by-step programming instructions are as follows:
- The first method is to turn on the smart device (TV) that you wish to program with the Magnavox DVD universal remote.
- After that, activate the remote and hit on the device button for about three seconds. The LED light of the remote will denote that the device is ready to program.
- Point out the Magnavox DVD remote towards the device and click on the channel up or down buttons. Press them repeatedly till the device gets off.
- You have to confirm the remote code by tapping on the Power button. The device will turn on. When the device starts, change the channels for confirming the remote’s programming.
- Click on the device button to secure the code. The LED of the device will flash two times for verifying the stored code.
How do you program a Magnavox DVD Universal Remote with the help of the Code Search Technique?
If you are unable to find the right key code working for the appliance, at that time you can set up your Magnavox DVD universal remote to search mode for getting the correct one. It is a programming code in the manual that forces the universal remote to search mode. Check out the programming user manual below:
- Switch on the programming appliance that you want to connect with the Magnavox DVD player remote.
- Press and hold down the ‘Setup’ key of the universal remote.
- After that, insert the three-digit code (9-9-1).
- Press and hold down the ‘Power’ button on the Magnavox DVD universal remote. Then, tap on the Channel up key until your programming appliance turns off.
The method mentioned above will take some more time but is essential to find the right code. Once you finish the above process, your universal remote will work for all the remote functions.
How to program the Magnavox DVD Universal Remote with the Manual Process?
With the correct key code, one can program the Magnavox DVD universal remote easily as the key code finds the brand of your device. Programming is given in the step-by-step pattern:
- Turn on the device whether it is a TV, DVD, VCR or any other device that you wish to program with the Magnavox DVD remote control.
- Next, press the ‘TV’ button of the universal remote when the programming device is a television set.
- Click on the ‘Setup’ key of the Magnavox DVD universal remote and hold it down for some time. You will see the ‘Light Flash’ which means it is in learning mode.
- At last, insert the remote code that you got from the programming user manual.
- Once you are done with the process, aim the remote control at the TV and press and hold down the ‘Power’ key.
- Let go the ‘Power’ key when the screen turns off.
That’s all with the programming process. Now, your programming gadget (TV) will work perfectly with the universal remote. If it does not work, repeat the same method by using another code from the reference table.
The Final Words
We hope, this article was really helpful to you and you got to know everything about Magnavox DVD universal remote codes. Also, you came to know about different programming methods for the Magnavox DVD remote. We would like to hear about your experience with us. If you have any doubts regarding this content, please write to us.