Connect with us

lg tv remote codes

Lg Blu Ray Remote Codes & Programming Instructions [2024]

Published

on

If you are tired of maintaining more than one remote control for different devices in the household, universal remotes are the solution, which helps in operating multiple devices through only one remote. However, it is needed that the target device should be supporting the use of a universal remote. The LG Blu-Ray player supports any type of universal remote. The only thing that the user has to do is to program the remote using the correct code and the remote is good to go with the Blu-Ray player.

This article is about the Remote codes and Programming Instructions for the LG blu ray players. Following the steps mentioned in the instructions properly will help the user to use any universal remote with his/her LG Blu-Ray player.

Note: This article consists of a list of codes that are meant to be entered while programming a universal remote for a LG Blu-Ray Player. It is suggested to try the codes colored in blue from the list. If any of those codes do not work, then try the remaining ones.

Advertisement

Remote code Programming Instructions for LG blu ray player

The user needs to perform a short programming phase before the remote becomes ready to be used for the LG Blu-Ray player. However, the user needs to choose the proper code for programming. The steps for programming are given below:

Step 1: Turn on the Blu-Ray player.

[Tips: You are suggested to ensure the electric connection of the device to be proper as well as the batteries inside the remote to be in well condition.]

Advertisement

Step 2: Select the device by pressing on the designated button.

[Tips: You should press “Blu-Ray Player” on the remote.]

Step 3: Press and hold the “Set-up” button until the light flash appears.

Advertisement

[Tips: The ‘light flash’ refers to the device being in “Learning Mode”.]

Step 4: Enter the code selected from the above list.

[Tips: Select the code appropriately as much as possible.]

Advertisement

Step 5: Point the remote towards the device and then press and hold the power button.

[Tips: The IR sensor of the device generally resides somewhere near the screen. Point the remote to that direction for better results.]

Step 6: Release the power button when the screen switches off. 

Advertisement

Step 7: Switch on the device once again to check if the programming was successful or not. 

[Tips: If the programming was successful for using the correct code, the remote will be working properly for the device. However, if the remote seems to be not working properly, that means the programming was unsuccessful. The user has to repeat all the steps from the beginning using another code from the code list.]

NOTE: If you remove the batteries then you have to program your remote control again. To control your device with blu-ray remote control.

Advertisement

Lg Blu-Ray 5 Digit Remote Codes

Panasonic31641
Sylvania30675
Toshiba31769
Integra31769 ,32147
Insignia30675 ,32428, 32596
Denon32258
Yamaha32298
Samsung30199
RCA31769
Xbox32083
Philips32084 , 32434
LG30741
Microsoft32083
Magnavox30675
JVC32365
Onkyo31769 ,32147
Samsung30199
Viore32553
Vizio32563
Sharp32250
Marantz32414

4 Digit Lg Blu Ray Remote Codes

2270
2339
2368
2039
2352
1602
0741
2371
2303
2297

3-Digit LG Blu-Ray Universal Remote Codes

899
824
615
673

Alena is a tech blogger with a passion for helping people get the most out of their electronic devices. she has extensive experience with universal remote control programs, TV repair, and device repair. she is always up-to-date on the latest trends and technologies, and she shares his knowledge with his readers in a clear and concise way.

Trending