The Emblem universal remote can be programmed to work with devices from hundreds of manufacturers. To control the device, you have to go through the program sequence. Enter the code manually or let the remote control trace a different code. As soon as the universal remote control finds the correct code, just confirm the setting.

How to program the Insignia Universal Remote with Code Search

If you cannot find a suitable lock code for your device at this time, you can set the universal remote control to the correct one in search mode. This is a manual mode code that forces the remote control to search mode

Step1: First “activate device”

Step2: Now hold down the “Setup” button

Step3: Enter the code “9-9-1” (three digits)

Step4: Now hold down the power button on the remote and press channel up until the device turns off your TV.

The method above may take some time, but it is very important to find your lock code. After the above process, your remote control will work for all functions.

Manual setting

Step1: Find the device code from the manufacturer of the device that you want to control with the remote control.

Step 2: Turn on the device, hold down the “Set” button, and press the button with the name of the device type.

step 3: Release the button when the device type indicator lights up.

STEP 4: Enter the three-digit manufacturer code and press the device button. The light flashes then go out.

Test the setting by pressing the “Power” button. If the device is off, the code is correct. If not, try another code.

How to program Insignia universal remote control with automatic search

With the automatic search method, all universal remote control codes are scanned on the remote control. The codes are scanned one by one to find the correct remote code that works with the remote to program the controller. Follow the instructions below:

Step1: “Turn on” the smart device as the “television” you want to use with the universal remote control.

Step2: Turn on the remote control and touch the device button (TV, DVD, CBL, and OK / SEL) for 3 seconds. The LED display indicates that the device is ready for programming.

Step3: Point the remote control at the device and click the “CH +” and “CH-” buttons. The remote control displays an on / off signal. Press the up or down button repeatedly until the device turns off.

Step4: Check the code by clicking the On / Off button. The device must be turned on. When starting up, try changing the channel to make sure the remote has been programmed correctly.

Step5: Now tap on the “Device” button to save the code. The device LED flashes twice to confirm the stored code. The above three methods allow us to easily program our universal Insignia TV remote control.