Program Your Insignia Remote to Control Comcast in 5 Minutes

Insignia remote codes for Comcast can be found in the table below. To program your Insignia universal remote to control your Comcast TV, simply follow the steps below.

List of Comcast Remote Codes for setting up the Insignia TV

If you are searching for the Insignia TV codes for programming the Comcast remote, you will get them in the below table. You have to check them one by one and find the matching code for the device. Once you got the proper code, enter it and follow the programming steps. So, find the compatible code for Insignia TV from the given list of Insignia TV codes for Comcast.

5-Digit Programming Codes for Digital Adapter Remote

Program your Comcast Remote with the Insignia Television

You have to carry out the following steps for programming the Comcast remote control with Insignia TV:

Step-1 Initially, turn on your Insignia TV.

Step-2 Find the TV button on the remote and press and release it.

Step-3 Tap on the Setup button on the Comcast remote and hold it till the TV button flashes two times.

Step-4 You will get the four-digit codes above. You have to insert one of the four-digit codes from the code list. This will make the TV buttons blink twice.

Step-5 Finally, click on the Power button by aiming the Comcast remote at the TV. If the TV goes off, you end up programming the remote. If the TV does not shut off, follow the programming again by using a different code from the code list till the TV turns off.

Program the Insignia TV to an Xfinity Comcast Remote Control

The detailed step-by-step programming for Insignia TV with the Xfinity Comcast remote:

Step-1 Turn on the Insignia TV that you will be programming with the Xfinity Comcast remote control. Make sure that the batteries are working or not.

Step-2 Note down all the codes for your TV first so it will be easy to enter when needed.

Step-3 On the Xfinity Comcast remote control, click on the Setup key till the LED light on the top of the remote changes from red to green.

Step-4 Insert the 4 or 5-digit code for the device with the help of the number keys on your remote.

Step-5 If the entered code is correct, the LED light of the remote will flash twice. You have to watch out for the signals to verify that the programming has worked.

Step-6 After finishing the process, you have to aim the Xfinity Comcast remote towards the Insignia TV. Now, press and hold down the Power key of the remote.

Step-7 Leave the Power key when the Insignia TV turns off completely.

Step-8 If the appliance turns off that means the programming has worked out. To verify again, switch on the TV and use any keys of the remote. You can confirm the programming if it follows the commands.

Step-9 If the TV does not follow the remote commands, repeat the same process with another code from the above code list.

Conclusion

In this blog, you got the idea of how to program the Comcast remote and the Xfinity Comcast remote with the Insignia TV by adding the right key codes. The lists of codes are mentioned above wherein you have to select the perfect one for your device.

After adding the code, carry out the programming instructions correctly. Share this information with your relatives and colleagues so that they will also get benefit from this blog.