If you are searching for a cable provider, Dish network is the best option to consider. Also, Dish Remote is a good investment. This dish remote can control the dish network receiver and the other devices. Like home theatre, Tv and soundbar. To control your device, your remote has to be programmed and paired before using the device. In other universal remotes, you need remote codes to program. But, in this article, we will discuss How to program dish remote to tv without code. This process will be easier for you to program your dish remote.

Dish Remote Codes for Philips TV & Program Setup

Here, we have given the information about programming your dish remote without code. You have to use simple methods to program. We will tell you the easiest way to program within a few minutes. You have to follow the instructions in order to pair your dish remote to the Tv. 

The new and old models are available in the market. There are different ways to program both models. First, you have to check the model you are using. The older model includes the 20.0 and 21.0 series and the newer model includes 40.0, 50.0, 52.0, and 54.0. 

Note: If you don’t know which model is yours. You can use the MyDISH website, this website may have different remote models. You can compare your remote on your screen.

How To Program Dish Remote To Tv Without Code

Once, you are familiar with your model’s name. Likewise, we can start programming. For newer models like 40.0, 50.0, 52.0, and 54.0 you have to enter the power Wizard option from the Dish remote under settings. Automatically, the remote will pair. All you need to do is to follow the onscreen instructions. 

For Older models like 20.0 or 21.0 of your remote control. A power scan will be performed by the remote control. It will keep scanning until the correct one is found that works. 

Programming a New Model Of Dish Remote Without Code

To program the new dish model remote like 40.0, 50.0, 52.0, and 54.0, follow the given steps

  1. First, press the home button on your remote control two times. In the 40.0 model, you don’t have the home button so, you can use the menu button. 
  2. Go to the setting option. Select the remote control option from the menu.
  3. Now, from the menu select Pairing wizard.
  4. Select the exact brand of the device that you want to connect to your dish remote.
  5. After that, the pairing wizard will try different device codes on your device to pair with. You have to follow the onscreen instructions. It may involve pressing the volume or power button to check if the pairing worked. 
  6. If it’s successfully paired. You have to select the finish option on the screen. 
  7. If not, you have to select Try Next Code and try until you find the right one.

Programming Old models of dish remote without code

To program old models of dish remote like the 20.0 or 21.0 series, follow the given steps

  1. Point your dish remote facing the device that you want to control.
  2. Press and hold the device button like DVD, Tv, or AUX. It depends on the device you are using.
  3. Wait for 10 seconds and the buttons will indicate a light. When the light indicates release the device button. The light will blink
  4. Tap on the power button on the dish remote. The light will stop blinking. Now, the remote is ready to program. 
  5. Press the (UP) direction button on your dish remote and the first code will be sent.
  6. Keep pressing the up button until your device turns off. you have to press the button after every few seconds. When the device found the right code, it will turn off. 
  7. Press the # button and your code will be saved. This button will flash light several times indicating your code is stored.

That’s all. If you have done the above process correctly then, you can operate your device easily. Make sure you choose the correct model of your dish remote. So, that you can program right.