How to Get CL4 Codes for GE/Jasco Remote Control

Are you trying to find the CL4 codes for the remote control for your GE Jasco? If that’s the case, you should check out the information on this page. It possesses the exact same thing that you are seeking for. All of the 4-digit codes that are required for the Jasco remote control may be found here. Therefore, without spending any more time, you should immediately begin reading the material and locate the code that you have been seeking nonstop.

By entering the GE Jasco Universal Remote Codes into the appropriate programming section of your GE Jasco universal remote, you will be able to control many devices using only a single GE Jasco remote.

GE CL4 Universal Remote Codes for Vizio TV

GE CL4 Universal Remote Codes for Samsung TV

GE CL4 Universal Remote Codes for Sanyo TV

GE CL4 Universal Remote Codes for Lg TV

GE CL4 Universal Remote Codes for Sony TV

GE Universal Remote CL4 Codes for Element TV

GE Universal Remote CL4 Codes for Insignia TV

GE Universal Remote CL4 Codes All Brands

You are welcome to have a look at the following list, which contains all of the CL4 codes for the GE Jasco control. You go through the entire list and find the one that is compatible with your system.

CL4 compliant remote controllers

It is possible that the same type of GE or Jasco remote control might have been manufactured with a variety of distinct code versions. You may discover the model number of your remote control as well as the code version by looking at the printed label that is either positioned inside the battery compartment or on the door that covers the battery compartment. Code List 4 was introduced in the year 2016 and was in use until about 2019; hence, the vast majority of Jasco remote controls that were sold during this time period were most likely sent with CL4 codes:

FAQ

How can I connect my Jasco remote control to my television?

• The red light on the remote will come on when you hold down the SETUP button for a few seconds.
• Press and release the device’s designated button (e.g., TV, CBL, DVD, AUD).
• Enter the first four digits of your device’s code. The red light will disappear.
• Test the buttons by pointing the remote at the device.

What’s the best way to programme a Jasco?

• Begin at the top and work down until you locate one that is compatible with your device.
• Press And hold THE SETUP Key Till The RED LIGHT ON THE REMOTE TURNS ON.
• SELECT THE DEVICE AND PRESS AND RELEASE THE Key (E.G., DVD, TV, CBL, AUD).
• ENTER YOUR DEVICE’S FIRST 4-DIGIT CODE. THE RED LIGHT WILL DISAPPEAR.

What’s wrong with my GE universal remote?

It’s conceivable that your controller is set to shift. While the red light is blinking, push and discharge the shift/setup button, then use your arrow buttons. Try reprogramming your remote with a different device code if this doesn’t work or your control doesn’t have a shift function.