GE Universal Remote Control 4-Digit TV Codes: Setup Guide

Are you seeking for GE Universal remote control four-digit TV codes? (V1). If that is indeed the case, take a look at the information offered below. You’ll find everything you need right here. The four-digit and additional digit codes for GE Universal remote controllers (V1) are all mentioned here. As a result, you must begin reviewing the material as soon as possible in order to explore the codes you’ve been asking for.

Have a look at the full list that’s provided below to identify the 4-digit TV codes that are compatible with GE Universal remote controllers. Because there is a comprehensive menu, you will need to carefully examine each of the codes in order to discover the one you are searching for.

Older (V1) GE/Jasco universal remote controllers use 4 digit TV codes. Open the battery compartment, remove the batteries, and look for the label with the model number to determine the code version of your remote. The V1 code list from this page is used by older remotes with no version following the model number. See our 4 digit V2/V4 and 4 digit V3/V5/CLx code listings for newer remotes. Instructions for entering the code may be found here.

GE Universal Remote Control Four-Digit TV Code

FAQ

How can I configure a GE remote to operate automatically?

Switch on the gadget that you want to programme. Hold the CODE SEARCH/SETUP button down until the INDICATOR LIGHT illuminates, then release. For the device you’re programming, press and release the device button (TV, VCR,DVD, etc.). The INDICATOR LIGHT will blink once before remaining illuminated.

Without a code, how can I programme a universal remote?

Common technique #4: Press and hold the power button and the device key simultaneously until the LED blinks or remains illuminated, then release and press the power button again until the device turns on or off, then push the device key (sometimes the stop button) to store the setting.

Is it possible to configure a universal remote without turning on the television?

Once configured, a universal remote can take the place of the remote that comes with your television. While it’s best to have the TV on while programming is suggested, you may still do it with it turned off.