Cable TV offers a variety of remote controls for people with whistling problems. When you receive a new remote control, the next step is to program it to work with your TV, cable TV, DVD player, and/or audio device. However, not all paper remote controls are the same, and the method used for the program varies slightly depending on the model.

Charter Remote Codes List

Brand Code
LG 1423, 0178, 0017, 1768
RCA2434, 2746, 2932, 0047, 2183, 3382, 0051, 1661, 1958, 1959, 1868, 0090, 2855, 3577, 3717
Sony 0810, 1685
Panasonic 1480, 1927, 1947, 1925, 0051
Samsung 2051, 1959, 0178, 0812
Philips 1867, 1454, 2597, 0171, 1365, 1990, 2492, 2622, 2992
Toshiba 1524, 1343, 1369, 1935, 1959
Magnavox1867, 1454, 2597, 1755, 0171, 0051, 1365, 1913, 1963, 1990, 2492
Insignia 2049, 1423, 1564, 0171, 0463, 1204, 1326, 1517, 1660, 1963, 2417, 2751
Sharp 2360
TCL 2434
Vizio 1758, 2707, 0864, 1756, 0885
Zenith 1423, 0178, 0047, 0017, 0463, 1661, 1365

Program charter remote codes correctly solves many problems. This takes a few minutes and can save you a lot of valuable time later. Before you start, pay attention to the remote control and pay attention to a few things that can make programming faster and easier. Find important buttons, such as Settings and Power. They stop you from trembling to find them while you are in the middle of the programming process.

To set up the remote control for a TV charter

Step-1 To program the device, enter the 4-digit code on the device. This code can be found in the manual. Or you can check the instructions on the official Spectrum website.

Step-2 Turn on the device you want to program.

Step-3 Press the appropriate button on the remote control corresponding to the device you want to program using the VCR, DVD, etc.

Step-4 Press and hold the Settings button until the red indicator blinks twice.

 Step-5 Enter the 4-digit Charter Remote Codes indicated in the manual / website using the keypad on the right side of the remote control.

 Step-6  Leave the power button on the remote control when the device is turned off. If it is not turned off, start from step 3 and program the device using the following Charter Remote Codes.

Here are 6 standard steps for programming a device. You can repeat each time you program from the remote. All you have to do is change the buttons on the remote control according to what you are programming.

Program charter remote control with automatic detection Many modern features has an automatic detection function that allows you to try different Charter remote codes until you find the correct code instead of exiting all codes.

How it works:

  1. First, activate the device that you use to remotely program paper. If it is a DVD player, plug it in.
  2. At the top of the remote control, there are four buttons: TV, DVD, CBL, and AUX. Each key is assigned to a specific device (for example, AUX: this button is for audio and video receivers, as well as for other devices not included in the other three categories of buttons: DVD: for DVD players and Blu-ray players. TV CBL program: applies to digital receivers, such as cable boxes
  3. Press OK / SEL and the buttons corresponding to the device (TV, DVD, CBL, or AUX) simultaneously and hold them for 3 seconds. Press the button at the same time. After 3 seconds the LED lights up for 30 seconds.
  4. Press CH or CH- so that the indicator lights up while the process is running. When the device is turned off, you can stop pressing the button. To check if programming works, press the power button, and try another button on the remote control.
  5. If the problem persists, repeat step 3.6. Finally, press one of the 4 buttons (TV, DVD, CBL, or AUX). The code is stored on the device.

Program Charter Remote: 1060BC2

The Charter 1060BC2 remote control is also called stand-alone spectrum remote control. This is what the client has installed. So if you have your own Charter Spectrum set-top box, this will be your remote. The remote control allows you to pause, rewind, forward, and record programs on the TV.

You can program the chartered remote control by pressing the button of the device you want to program for the remote control, and then pressing the Settings button until you see the indicator on the remote control. Enter the code for your TV, audio, or DVD device. Regular television codes include LG: 11423, 10856, 11178, Sony: 10810, 11685,

Vizios: 11758, 10864, 10885 and Samsung: 10812, 10766 and 10814. Common codes for a DVD player include RCA: 20522, 20571, 20717, and Sony. : 20533, 20864, 21033, and Samsung: 20490, 20573, and 20199. Additional remote charter code can be found at 1060BC2, a remote charter guide on the Charter Spectrum website.

After trying each code, press the “Power” button on the remote control. Programming is completed when the device is turned off or on. If not, try the code below for your device and brand.

Program Spectrum URC 2060 Remote:

The Spectrum URC 2060 remote control is a “charter remote control” with automatic programming for TVs. This means that you do not need to enter program codes for the 10 most popular television brands.

You can program the remote control by holding the “Settings” button and pressing the TV’s on / off button on the remote control when the remote control indicator blinks twice.

Press and hold the specific brand number of the TV, then release it when the TV is turned off. Using Insignia / Dynex TV 1, Using LG / Zenith TV 2, Using Mitsubishi TV 3, Using Panasonic TV 4, Using Philips / Magnavox TV 5, Using Samsung TV 6, Using Sony TV 8, Using Sony TV 8, Using Toshiba TV 9 , Toshiba TV 9 and Vizio TV 0.

You can search for Charter remote codes for programming various brands of TVs. To do this, press the “Settings” button until it starts flashing, then press the “TV Power” button. Click and hold the OK button / Select until the TV turns off. Then,  was successfully programmed to control the TV.

Read Also: Official Philips Universal Remote Codes List

Program UE C4000/S4000 Remote:

The Spectrum Universal Electronics C4000 Remote Control is another frequency remote control that can control multiple devices, including audio, DVD, and TV.

You can program a specific device with the code of this brand. Press the button of the device you want to program on the remote control, then press and hold the “Settings” button until a double flash appears.

Enter the device code. Typical Vizio television codes include 11758, 10864, and 10885, and typical Sony television codes include 10810 and 11685. Samsung television codes are 10812, 10766, and Magnavox 11866, 10802, and 11198.

Find remote paper codes for different users. For information on televisions and devices, see the C4000 Remote Control Guide available on the Charter Spectrum website. After trying all the codes, press the “Power” button. If this works, your TV is programmed on the remote control. If not, try a different Charter remote code.


Leave a Reply